5 Series E60 525d (M57TU) SAL
Measurement a = approx. 30 mm from side panel severance cut.
Remove cavity bulkhead (3).
Open weld joints in areas (4).
Installation:
Mark severance cut (1) on new side panel in accordance with vehicle and cut.
Insert reinforcement plate at severance cut.
Apply window glass adhesive to cavity acoustic baffle (3).
Open weld joints in area (1).
Remove front C-pillar reinforcement (2).
Mark severance cut (1) in accordance with measurement a and
cut.
Important!
Cut outer metal sheet only.
Measurement a = approx. 200 mm from roof edge.
Open weld joints in areas (2).
Installation:
Mark severance cut (1) on new part in accordance with vehicle
and cut.
Insert reinforcement plate at severance cut.
Cut wheel arch along line (1).
RA Replacing complete rear left wheel arch (rear left side panel removed)
BMW AG - TIS
11.02.2013 18:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
