5 Series E60 525d (M57TU) SAL
51 16 211
Removing and installing/replacing finisher for
storage tray
Necessary preliminary tasks:
•
Remove knob for controller
•
Remove button unit
Version with manual transmission:
•
Remove gaiter for gear lever
Version with automatic transmission or SMG:
•
Remove finisher for preselector lever
If necessary, remove ashtray insert.
Release screws (1).
Open centre console cover.
Press release button for centre console cover and release
trim (2) from catches (4).
Feed trim (2) towards top/rear out of storage compartment (3).
If necessary, disconnect plug connections on insert at front.
Security version:
Disconnect plug connection on intercom system switch.
Installation:
Following parts of trim (4) must not be damaged or missing:
1
Front insert
2
Retaining lugs
3
Pins or spring clips
Replacement:
Remove front insert (1) .
Replacement with Security version:
Remove intercom system switch.
RA Removing and installing/replacing finisher for storage tray
BMW AG - TIS
11.02.2013 20:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
