bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

7 RA Removing And Installing _ Replacing Left Tension Spring With Damper For Rear Lid|Page 1772 > < 6 RA Removing And Installing_replacing Left Tension Spring For Rear Lid|Page 1770
Page 1
background image

51 24 326

Removing and installing / replacing left
tension spring with damper for rear lid

Necessary preliminary tasks:

Remove right luggage compartment wheel arch trim.

Warning!

Support rear lid in fully opened position with suitable
apparatus. Risk of injury.

Pull off retainer (1) upwards.

Pull off tension spring with damper (2) in inwards direction.

Warning!

The rear lid will drop down if it is not supported.

Unhook tension spring with damper (1) from rear lid hinge (2).

RA  Removing and installing / replacing left tension spring with damper for rear lid

BMW AG - TIS

11.02.2013  20:59

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

7 RA Removing And Installing _ Replacing Left Tension Spring With Damper For Rear Lid|Page 1772 > < 6 RA Removing And Installing_replacing Left Tension Spring For Rear Lid|Page 1770