bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing_replacing Housing Cover On Inner Left Or Right Door Wind|Page 1823 > < 2 RA Removing And Installing_replacing Trim For Window Guide Of Left Or Right Rear Do|Page 1821
Page 1
background image

51 34 160

Removing and installing/replacing housing
cover on inner left or right door window frame

Necessary preliminary tasks:

Open door window.

Remove rear door trim panel

Security version:

Cover is designed as armour plating and bonded to door window
frame, replacement is not possible.

Version with roller sun blind on rear door:

If necessary, unclip cover (1) and release screw (2) underneath.

Remove hook (3) on cover (4).

Replacement:

If necessary, release screw (1) on hook (2).

Remove hook (2) in direction of arrow from cover (4).

Version without roller sun blind:

If necessary, lever out cover (1) in direction of arrow.

Note:

Do not tear off cover (1) in area (2).

RA  Removing and installing/replacing housing cover on inner left or right door wind

BMW AG - TIS

11.02.2013  21:14

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing_replacing Housing Cover On Inner Left Or Right Door Wind|Page 1823 > < 2 RA Removing And Installing_replacing Trim For Window Guide Of Left Or Right Rear Do|Page 1821