5 Series E60 525d (M57TU) SAL
Disconnect remaining plug connections.
Remove door trim.
Installation:
Connect all plugs to original locations.
Installation:
Clips (2) are longer than the other clips.
Clips (2) are gray, remaining clips (3) are white.
Fit all clips with sealing ring.
If necessary, replace faulty clips.
Attach central clip mounting (1) to door trim panel.
Installation:
After assembling the door trim panel proceed as follows:
-
Open door window,
-
lock with ignition key,
-
check whether linkage of safety lock button can move freely,
-
if necessary, align linkage.
RA Removing and installing front left or right door trim panel (up to 03/2007)
BMW AG - TIS
11.02.2013 21:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
