5 Series E60 525d (M57TU) SAL
Version 1:
Slide floating roofliner (1) behind headliner (3).
Release remaining screws between mounting frame and glass
sunroof cover with special tool 54 1 230 .
Release screw on mounting for bracket at rear.
Version 2:
Connect BMW diagnosis system and Service function:
-
Body
-
Locking and security functions
-
Slide/tilt sunroof
-
Select delivery position.
Remaining screws on mounting frame are now accessible and can
be released.
Move seat back of front seat to max. rear position.
Press headliner (1) towards front out of sliding clips (2) and
remove towards right rear door.
Installation:
Following parts of headliner (7) must not be damaged or missing:
1
Mounting for console, front
2
Metal nuts for cover frame
3
Mounting for console, rear
4
Mountings for sliding clips
5
Sliding clips (release from roof frame)
6
Retainers (insert in roof frame)
Installation:
Installation sequence:
1.
Carefully attach headliner at rear.
2.
Secure screw on mounting for bracket
3.
Screw down screws for sunroof frame
4.
Screw down grab handles at front on left/right
5.
Screw down sun visors and counter-supports
6.
Screw down grab handles at rear on left/right
RA Removing and installing / replacing headliner (with slide / tilt sunroof)
BMW AG - TIS
11.02.2013 21:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
