bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

8 RA Replacing Rear Spoiler (M5)|Page 1974 > < 7 RA Removing And Installing_replacing Tension Strut On Spring Strut Dome|Page 1972
Page 1
background image

51 71 407

Replacing rear spoiler (M5)

Special tools required:

00 9 318

Important!

The Instructions on component cementing with double-sided
adhesive tape serve as the basis for this repair instruction and
must be observed without fail.

Removing rear spoiler:

Carefully detach rear spoiler (1) from rear lid with special tool 
00 9 318  (assembly wedge) and hot air blower.

Installation:

For cleaning, use a fluff-free disposable cloth or a clean cleaning
cloth.

Clean adhesive area of rear lid with spirit.

Air drying time at least 1 minute.

Determining centre of rear lid:

Measure rear lid from left edge to right edge.

Mark centre of rear lid with adhesive tape.

Also mark centre above BMW badge on lower section of rear lid
(see adhesive tapes (1) in next illustration).

Determining fitting dimensions of rear spoiler:

RA  Replacing rear spoiler (M5)

BMW AG - TIS

11.02.2013  22:19

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

8 RA Replacing Rear Spoiler (M5)|Page 1974 > < 7 RA Removing And Installing_replacing Tension Strut On Spring Strut Dome|Page 1972