bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

14 RA Removing And Installing_replacing Backrest Frame On Left Or Right Front Seat (co|Page 2097 > < 13 RA Removing And Installing_replacing Drive For Left Or Right Active Seat (comfort)
Page 1
background image

52 17 030

Removing and installing/replacing backrest
frame on left or right front seat (comfort)

Necessary preliminary tasks:

Remove front seat

Remove both rear panels on front seat backrest

Remove inner cover on front seat

Remove backrest cover for front seat

Remove head restraint support on front seat

Release all cable ties on wiring harness (1).

Disconnect all marked plug connections.

Feed through wiring harness (1) at bottom right on backrest
frame.

Unclip left and right clips (1).

Unhook seat covers (2) on left and right.

Release left and right screws (3).

Tightening torque  52 10 2AZ

.

 

If necessary, remove lumbar cushion with drive and valve block.

Remove backrest frame.

Installation:

When replacing backrest or seat frame, break off centring
hooks (1) from seat frame.

RA  Removing and installing/replacing backrest frame on left or right front seat (co

BMW AG - TIS

12.02.2013  00:45

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

14 RA Removing And Installing_replacing Backrest Frame On Left Or Right Front Seat (co|Page 2097 > < 13 RA Removing And Installing_replacing Drive For Left Or Right Active Seat (comfort)