5 Series E60 525d (M57TU) SAL
61 35 177
Removing and installing (replacing) rain/light
sensor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
Version with Autobeam:
•
Remove interior rear-view mirror
Detach two-part mirror base cover (1) by pressing from below.
Feed out two-part mirror base cover (1) and remove.
Note:
Catches of two-part mirror base cover (1) must not be damaged
or missing.
Disconnect plug connection (3).
Release locks (1) in direction of arrow and remove rain/light
sensor (2) from optical element.
Installation:
Do not damage optical element covered by rain/light sensor (2).
Initialize rain/light sensor.
RA Removing and installing (replacing) rain/light sensor
BMW AG - TIS
12.02.2013 03:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
