5 Series E60 525d (M57TU) SAL
Pull bumper panel (1) forwards slightly and feed out
headlight (2) in direction of arrow.
Installation:
Make sure headlight (2) is correctly seated in lower holder.
Unlock and disconnect associated plug connections (3).
Remove headlight (2).
Replacement:
•
Unclip headlight holder (1) and remove.
•
Remove ignition unit and bulb for xenon headlight (2)
•
Remove control unit for xenon headlight (3)
Installation:
Retaining lugs (1) on headlight holder (2) must not be damaged.
Make sure headlight holder (2) is correctly engaged on headlight.
RA Removing and installing/replacing left headlight (xenon headlight)
BMW AG - TIS
12.02.2013 03:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
