bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

9 RA Replacing Line From Compressor To Condenser (S85)|Page 2735 > < 8 RA Removing And Installing Or Replacing Condenser For A_C System|Page 2733
Page 1
background image

64 53 642

Replacing line from compressor to condenser
(S85)

Warning!

Risk of injury!

Refrigerant circuit is under high pressure!

Follow safety instructions for handling R 134a refrigerant .

Avoid contact with refrigerant and refrigerant oil.

Follow safety instructions for handling refrigerant oil.

Important!

Risk of damage!

Restart engine only when A/C system has been correctly
filled.

Follow instructions for opening and replacing parts in
refrigerant circuit.

If A/C system is opened for more than 24 hours:

Replace desiccant insert for A/C system 

Necessary preliminary tasks:

Drawing off, evacuating and filling the A/C system are not

included in the time value given for this work operation

Remove right intake filter housing

Important!

Do not place front panel centre section (2) on jump
start terminals.

Do not kink Bowden cables of engine hood/bonnet lock.

Release screws (1).

Remove front panel centre section in direction of arrow and place
to one side.

RA  Replacing line from compressor to condenser (S85)

BMW AG - TIS

12.02.2013  05:27

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

9 RA Replacing Line From Compressor To Condenser (S85)|Page 2735 > < 8 RA Removing And Installing Or Replacing Condenser For A_C System|Page 2733