bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing_replacing Control Unit For Lane Departure Warning|Page 2870 > < 8 RA Removing And Installing_replacing Longitudinal Dynamics Module
Page 1
background image

66 51 010

Removing and installing/replacing control
unit for Lane Departure Warning

Necessary preliminary tasks:

Remove right glovebox with housing 

Version with CD changer:

Remove CD changer 

Version with CD changer:

Release screw (1).

Slacken screw (2) and slide CD changer bracket to one side.

Release screws (1).

Remove control unit for Lane Departure Warning (2) and
disconnect associated plug connections.

Replacement:

Release screws (1) and remove bracket (2) from control unit.

RA  Removing and installing/replacing control unit for Lane Departure Warning

BMW AG - TIS

12.02.2013  06:26

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing_replacing Control Unit For Lane Departure Warning|Page 2870 > < 8 RA Removing And Installing_replacing Longitudinal Dynamics Module