5 Series E60 525d (M57TU) SAL
67 62 020
Removing and installing/replacing flat motor
for rear left or right power window regulator
Necessary preliminary tasks:
•
Detach soundproofing on rear door in working area.
Unfasten plug connection (1) and disconnect.
Release screw (2) of locking bar (3).
Remove locking bar (3) in direction of arrow from flat motor for
power window unit (5).
Release screws (4).
Carefully press flat motor for power window unit (5) towards rear
out of mounting.
If necessary, pull power window unit forwards slightly and feed out
flat motor for power window unit (5) and remove.
Installation:
Make sure guides (1) are correctly seated when fitting retaining
clip (2).
Replacement:
Initialise power window.
RA Removing and installing/replacing flat motor for rear left or right power window
BMW AG - TIS
12.02.2013 06:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
