5 Series E60 525d (M57TU) SAL
84 50 060
Removing and installing/replacing Bluetooth
antenna
Necessary preliminary tasks:
•
Remove center console
Unfasten plug connection (1) and disconnect.
Detach Bluetooth antenna (2) in direction of arrow from rear-
compartment ventilation duct (3).
When replacing dual-lock tape:
•
Clean bonding surfaces.
•
Stick on dual-lock tape and press down firmly with fingers for
at least 2 secs. (ambient temperature at least 18
°
C).
•
Fit Bluetooth antenna on rear-compartment ventilation duct
only after a minimum period 30 minutes (strain-free dwell
time).
•
Subjecting the bond to premature load will result in a loss of
adhesion and thus a defective bond => use new dual-lock
tape.
Installation:
Fit Bluetooth antenna (1) during installation so that dual-lock
tapes (2) and (3) coincide exactly.
RA Removing and installing/replacing Bluetooth antenna
BMW AG - TIS
12.02.2013 07:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -