bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 SBT Dynamic Stability Control 8Plus E60, E61, E63, E64, E83, E90, E91, E92|Page 4233 > < 2 SBT Dynamic Stability Control 8Plus E60, E61, E63, E64, E83, E90, E91, E92|Page 4231
Page 5
background image

The CAS control unit and M-ASK/CCC receive the converted wheel speed signal from the rear left wheel.

Both these control units use this signal to ascertain whether the car is moving or at a standstill.

SGM: Safety and gateway module

> E60, E61, E63, E64 up to 09/2005

The SGM is the data interface (= gateway) between:

PT-CAN

K-CAN

Byteflight

Diagnosis wire to diagnosis socket

KGM: Body gateway module

> E60, E61, E63, E64 from 09/2005

The vehicle electrical system was changed from 09/2005. As a result of the change, several control units were
discontinued and some control unit functions were integrated into new control units. 
The new body gateway module supersedes the safety and gateway module (SGM) previously fitted.

The KGM is the data interface (= gateway) between:

PT-CAN

K-CAN

Diagnosis wire to diagnosis socket

JBE: Junction box electronics

> E90, E91 from 09/2005 and
> E92 from 06/2006

The JBE is the data interface (= gateway) between:

PT-CAN

K-CAN

Diagnosis wire to diagnosis socket

Signals from the chassis CAN (F-CAN) are simply looped through.

ACC: Active Cruise Control

DSC receives requests from Active Cruise Control (ACC) via the PT-CAN. In response, DSC reduces speed by
applying the brakes at all four wheels.

>

E60, E61, E63, E64

[for further information, please refer to SI Technology (SBT) 66 01 04 067]

>

E90, E91 from 09/2005 and 
E92 from 06/2006

The request for brake application is given by the LDM control unit (LDM: longitudinal dynamics
management).

[for further information, please refer to SI Technology (SBT) 66 03 04 086]

LM: Light module

> E60, E61, E63, E64

As required by law, the brake lights are activated in the event of automatic braking when the Electronically
Controlled Deceleration function (ECD) is triggered by the ACC.

To do this, a signal must be sent from the DSC to the light module (LM) via the K-CAN.

FRM: Footwell module

SBT  Dynamic Stability Control 8Plus E60, E61, E63, E64, E83, E90, E91, E92

BMW AG - TIS

12.02.2013  15:43

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 5 -

2 SBT Dynamic Stability Control 8Plus E60, E61, E63, E64, E83, E90, E91, E92|Page 4233 > < 2 SBT Dynamic Stability Control 8Plus E60, E61, E63, E64, E83, E90, E91, E92|Page 4231