bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

9 SBT Electrically Operated Trailer Coupling E60, E61, E90, E91, E92, E93|Page 4378 > < 9 SBT Electrically Operated Trailer Coupling E60, E61, E90, E91, E92, E93|Page 4376
Page 4
background image

The control unit for the electrically pivoted trailer coupling receives the input signal "terminal 30g" from the rear
electrical distributor.

The following components are controlled:

Drive system for the electrically pivoted trailer coupling

> E60, E61

The drive system pivots the ball head out and in fully automatically as far as each limit position .

[more ...]

Trailer coupling release drive

> E90, E91, E92, E93

The drive mechanically releases the trailer coupling ball head. This is done by a DC motor being actuated, which
drives the trailer coupling release unit.

[more ...]

Light-emitting diode in the button for the electrically pivoted trailer coupling and for the trailer coupling
release

The indicator lamp shows the system status.

Instrument cluster

The instrument cluster is actuated in the event of a Check Control message from the trailer module (AHM).

System functions

The following system functions of the trailer coupling release and electrically pivoted trailer coupling are described:

Releasing the trailer coupling (E90, E91, E92, E93)

Pivoting the electrically pivoted trailer coupling out and in (E60, E61)

Monitoring of terminal 15 and Check Control message

Undervoltage and overvoltage

Overheating protection for the drive system (E90, E91, E92, E93)

Adjusting the trailer coupling (E60, E61)

Emergency function (E60, E61)

Emergency operation (E90, E91, E92, E93)

Trailer coupling release

> E90, E91, E92, E93

The trailer coupling can be released from terminal 30g ON. The following signal conditions must be satisfied to
allow the coupling to be released:

Terminal 30g: high signal

Button: low signal

Terminal 15: low signal

Rear lid contact switch: low signal

Microswitch output 1: low signal

Microswitch output 2: high signal

The control unit for the trailer coupling release uses the signal conditions to check whether the release
procedure can be started. The DC motor is actuated. During release, the outputs at the microswitch change the
signal conditions. The indicator lamp lights up red. 

SBT  Electrically operated trailer coupling E60, E61, E90, E91, E92, E93

BMW AG - TIS

12.02.2013  16:00

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 4 -

9 SBT Electrically Operated Trailer Coupling E60, E61, E90, E91, E92, E93|Page 4378 > < 9 SBT Electrically Operated Trailer Coupling E60, E61, E90, E91, E92, E93|Page 4376