bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 SBT Instrument Cluster E60, E61, E63, E64, E70|Page 4465 > < 3 SBT Instrument Cluster E60, E61, E63, E64, E70|Page 4463
Page 4
background image

Note: Document of available Check-Control messages in BMW diagnosis system.

The service functions include a tabular list of Check-Control messages listed by their identification numbers.

Path: Service functions > Vehicle information > Check-Control messages.

The following control units remain important for the function of the instrument cluster:

Headset and Central Information Display

For the instrument cluster, the headset (M-ASK, CHAMP, CCC) serves as the interface to the Central
Information Display (CID). The CID displays detailed texts concerning Check-Control messages and information
about CBS and other on-board computer functions. The CID also enables the driver to change the units of
measurement (e.g. Celsius to Fahrenheit, and vice versa) for the instrument cluster.

Moreover, the headset establishes a telephone connection when a CBS maintenance operation is due (=
TeleService). This is achieved by sending a message to the telephone control unit via the MOST.

EGS: Electronic transmission control

The EGS control unit supplies the signal for the gear engaged to the instrument cluster. The selected gear is
shown in the selector-lever and shift indicator in the LCD display.

> E6x from 03/2007 and E70

The gear is selected with the gear selector switch (GWS). The GWS is a control unit in its own right on the PT-
CAN.

Car access system

The CAS control unit serves for redundant data storage. The following are stored in the CAS control unit
(redundantly to the instrument cluster):

Vehicle identification number

Odometer status

CBS data

Integrated automatic heating/air-conditioning system - only E6x up to 03/2007

The IHKA calculates the condition of the microfilter. The condition of the microfilter is CBS maintenance
operation.

The instrument cluster internally controls the following instruments and indicators:

Analogue instruments and moving-disc indicators

The instrument cluster incorporates a number of instruments that operate with step motors, namely:

Speedometer

Revolution counter

Fuel gauge

Fuel consumption indicator (E60, E61, E70)

Engine oil temperature (E63/E64)

Moving-disc instrument for the speed setting of the cruise control system

Moving-disc instrument for variable engine speed warning zone (currently only M-Technology)

 [more ...]

Indicator and warning lights:

The single-colour indicator and warning lights that are required by law at the top, centred between the two large
analogue instruments (exception: turn signal indicator lights at sides).

The most important indicator and warning lights briefly light up during the pre-drive-check when terminal 15 is

SBT  Instrument cluster E60, E61, E63, E64, E70

BMW AG - TIS

12.02.2013  16:10

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 4 -

3 SBT Instrument Cluster E60, E61, E63, E64, E70|Page 4465 > < 3 SBT Instrument Cluster E60, E61, E63, E64, E70|Page 4463