bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 SBT Main-beam Assistant E60, E61, E63, E64, E65, E66, E70, E90, E91, E92, E93|Page 4508 > < 4 SBT Main-beam Assistant E60, E61, E63, E64, E65, E66, E70, E90, E91, E92, E93|Page 4506
Page 7
background image

Image sensor's field of view obstructed (e.g. by snow)

Automatic alignment of the main-beam assistant

In order to operate correctly, the image sensor must be aligned parallel with the vehicle's centreline. When the
car is driven at night, the main-beam assistant can automatically correct alignment up to 3

°

 to the left or 3

°

 to the

right. This correction compensates for minor deviations from the centreline. 

Driving conditions for automatic directional orientation of the main-beam assistant are:

Straight ahead for a distance of approx. 50 km: A relatively straight stretch accelerates the directional
orientation.

Road marking must be clearly visible.

[more ...]

Operation 

Operation of the main-beam assistant is described in a separate section.

The following controls of the main-beam assistant are described:

Switching on automatic headlight control

Activating the main-beam assistant

Deactivating the main-beam assistant

Reactivating the main-beam assistant

Switching on the headlight flasher

[more ...]

Preconditions for activation

For technical reasons, distinctions are drawn between the following conditions required for switch-on:

Conditions required for switch-on for the FLA control unit

Conditions required for switch-on for the main-beam assistant

Conditions required for switch-on for the main-beam headlights

Conditions required for switch-on for the FLA control unit

The FLA control unit is active as of terminal 15 ON.

Conditions required for switch-on for the main-beam assistant

Light switch set to position "A"

Dipped headlights switched on. 
When the switch is in position "A", the dipped headlights are switched on by the automatic headlight control.

Turn-signal/main-beam switch pressed forward (in forward direction of travel).

Conditions required for switch-on for the main-beam headlights

Road speed greater than 50 km/h.

Reverse gear must not be engaged.

Image sensor does not detect an oncoming vehicle or a vehicle ahead.

Image sensor detects adequate darkness.

SBT  Main-beam assistant E60, E61, E63, E64, E65, E66, E70, E90, E91, E92, E93

BMW AG - TIS

12.02.2013  16:14

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 7 -

4 SBT Main-beam Assistant E60, E61, E63, E64, E65, E66, E70, E90, E91, E92, E93|Page 4508 > < 4 SBT Main-beam Assistant E60, E61, E63, E64, E65, E66, E70, E90, E91, E92, E93|Page 4506