5 Series E60 525d (M57TU) SAL
•
Flaps (position of ventilating flaps adjusted)
MAX cooling (IHKA High)
The MAX button makes it possible for the user to select maximum cooling with just one press of a button at the
IHKA controls.
When the MAX button is pressed, all functions, including the defrost function, are deactivated. The air-
conditioning function is activated (if it was not already activated) and defined settings are selected
(e.g. temperature control is deactivated, the dual water valve is closed).
Maximum heating
If the rotary switch for temperature selection is turned to the end stop, maximum heating is activated. Regulation
of the vehicles interior temperature is suspended. Predefined settings are selected (e.g. temperature of heating
system heat exchanger regulated to maximum setting 90
°
C).
Residual heat (IHKA High only)
The residual-heat function makes it possible to utilise the waste heat from the engine to heat the vehicle interior
when the engine is not running. The auxiliary water pump is activated to circulate the water.
Switch-on conditions:
•
REST button in IHKA controls ON
and
•
ambient temperature below 25
°
C
and
•
engine temperature above 60
°
C
and
•
ignition lock position R or ignition OFF
and
•
15 minutes after terminal 15 OFF not yet expired
Defrost function (IHKA High only)
The defrost function is activated with the defrost button in the IHKA controls. This opens the defroster flap (on
the inside in front of the windscreen) fully. The fresh-air/air-recirculation flaps move to the "fresh air" position. All
other flaps are closed. The blower can be set manually.
Heated rear window
The heated rear window is switched on by pressing the heated rear window button in the IHKA controls. The
function indicator lamp in the button lights up.
The heated rear window is switched off when the button is pressed again, or automatically when the heating
period of 10 or 17 minutes has expired. If the button is pressed again during the heating phase, the
afterheating phase (approx. 5 minutes) starts.
•
Defrosting phase
When terminal 15 is switched ON , the first time the system is switched on, the time span for the heated
rear window is defined as follows:
Ambient temperature down to -15
°
C: Heating period: 10 minutes
Ambient temperature below 15
°
C: Heating period: 17 minutes
•
Pulsing
After the defrosting phase, the heating phase (60 minutes at 1/3 heat output pulsing) begins (on-off cycle:
SBT Integrated automatic heating / air-conditioning system (IHKA), Basic and High E6
BMW AG - TIS
12.02.2013 16:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
