Removing and Installing Trim for Preselector Lever in BMW 5 Series E60 525i (N52) SAL
51 16 210
Removing and installing/replacing trim for
preselector lever (up to 03/2007)
Special tools required:
•
00 9 341
Necessary preliminary tasks:
•
Apply parking brake
•
Move selector lever to N position or engage neutral
Note:
Removing the trim for the preselector lever or the SMG gearshift
lever is virtually identical. The illustrations show the removal of the
trim for the preselector lever in versions with automatic
transmissions.
Note:
To be able to remove the preselector lever trim, it is not absolutely
necessary to remove the selector lever grip (1). However,
removing it does make it easier to remove the preselector lever
trim.
If necessary, remove preselector lever grip (1) .
Press sides of selector lever cover (2) together and feed out
towards top.
Unclip trim (4) with special tool
00 9 341 at retaining
points (3).
RA Removing and installing/replacing trim for preselector lever (up to 03/2007)
BMW AG - TIS
15.02.2013 14:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -