5 Series E60 525i (N52K) SAL
11 31 090
Installing and removing/replacing chain
tensioner piston (N52K)
Release chain tensioner (1).
Tightening torque 11 31 6AZ
.
Important!
Have a cleaning cloth ready. A small quantity of engine oil will
emerge after the screw connection has been released.
Make sure no engine oil runs onto belt drive.
Installation:
No sealing ring is fitted during series-production assembly.
A sealing ring must be fitted by service personnel when the chain
tensioner is fitted.
If the chain tensioner is reused, its oil chamber must be drained.
Place chain tensioner on a level working surface and slowly
compress.
Repeat procedure twice.
Assemble engine.
RA Installing and removing/replacing chain tensioner piston (N52K)
BMW AG - TIS
17.02.2013 03:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
