5 Series E60 525i (N52K) SAL
Supporting transmission:
Support transmission with special tools 23 4 050 , 23 0 132
and 00 2 030 .
Secure transmission with tensioning strap.
Tasks are described in Transmission bracket.
Note:
N53 only
Disconnect plug connection (1).
Remove cable from holders on carrier.
Unfasten screws (1) and nuts (2).
Remove transmission cross-member.
Tightening torque 22 32 3AZ/4AZ
.
-
Remove propeller shaft from transmission.
-
Release centre bearing.
-
Tie propeller shaft to one side.
Tasks are described in Removing propeller shaft.
RA Removing and installing automatic transmission (6HP19Z/N52/N52K/N53)
BMW AG - TIS
17.02.2013 14:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
