5 Series E60 525i (N52K) SAL
32 43 515
Removing and installing/replacing yaw
sensor for active front steering
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Important!
Do not kink floor panelling under any circumstances!
Necessary preliminary tasks:
•
Remove left front seat
•
Raise rear left floor trim in area of center console
Release screws (1).
Tightening torque 32 43 2AZ
.
Unlock plug (2) and remove.
RA Removing and installing/replacing yaw sensor for active front steering
BMW AG - TIS
17.02.2013 16:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
