5 Series E60 525i (N52K) SAL
51 11 156
Removing and installing front bumper trim
Necessary preliminary tasks:
Only up to 03/2007 without M5:
•
Remove middle grille
•
Remove air duct trim
Release screws (1) on wheel arch trim (2) on left/right.
Except M5:
Release screws (1).
Installation:
Make sure trims (2) are in correct position.
M5 only:
Unscrew screws (1).
Installation:
Make sure trim (2) is in correct position.
RA Removing and installing front bumper trim
BMW AG - TIS
17.02.2013 19:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
