5 Series E60 525i (N52K) SAL
51 16 270
Removing and installing rear console at rear
(long version)
Necessary preliminary tasks:
•
Remove upper rear console trim
•
Remove infrared trim
•
Remove lower rear console trim
•
Remove drawer
•
Remove fresh-air grille from rear console
Unclip panel (2) towards front from retainers (1).
Tilt panel (1) forwards slightly and feed out of rear console (2).
Installation:
Make sure panel (1) is correctly seated on panel (2).
Unscrew nuts (1).
Release cable tie (2).
Disconnect plug connections (1) and feed cable out of rear
console cable guides.
RA Removing and installing rear console at rear (long version)
BMW AG - TIS
17.02.2013 19:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -