5 Series E60 525i (N52K) SAL
52 13 015
Removing and installing/replacing actuating
unit on left or right front seat (normal/semi-
electric)
Necessary preliminary tasks:
•
Remove outer cover on front seat
Pull lever and release screw (1).
Note:
Protect seat rails (mechanism) by covering against chips/swarf.
Drill out rivets (2) with 4.2 mm dia. drill bit.
Remove actuating unit.
Unclip Bowden cable sleeve (1).
Feed Bowden cable nipple (2) out of fixture (3).
RA Removing and installing/replacing actuating unit on left or right front seat (no
BMW AG - TIS
18.02.2013 02:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -