5 Series E60 525i (N53) SAL
11 78 513
Removing and installing/replacing both
lambda oxygen control sensors (N53)
Special tools required:
•
11 4 260
Warning!
Scalding hazard!
Only perform these tasks after the exhaust system has cooled
down.
Necessary preliminary tasks:
•
Remove acoustic cover.
Installation:
If an oxygen sensor is reused, only apply a thin and uniform coat
of Never Seez Compound (refer to BMW Parts Service) to
thread.
The part of the oxygen control sensor which projects into the
exhaust system branch (sensor ceramic) must not be cleaned or
come into contact with lubricant.
RA Removing and installing/replacing both lambda oxygen control sensors (N53)
BMW AG - TIS
17.02.2013 23:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -