5 Series E60 525i (N53) SAL
Using a press and special tools 31 3 031 and 31 3 032 ,
press rubber mount out of tension strut.
Note:
Special tool 31 3 031 must be exactly flush with rubber mount
bushing.
Installation:
Keep rubber mount and bushing in tension strut clean and free
from grease.
Align rubber mount by way of arrow to marking on tension strut
and press in. The deviation must not exceed
±
5
°
.
Installation:
Protrusion (A) equally large.
RA Replacing rubber mounts on both tension struts
BMW AG - TIS
18.02.2013 02:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -