5 Series E60 525i (N53) SAL
52 24 ...
Removing and installing/replacing all guide
sleeves for rear head restraints
Special tools required:
•
52 0 070
Necessary preliminary tasks:
•
Remove head restraint from rear seat
1.
Backrest
2.
Guide sleeve of head restraint
3.
Retaining lug
4.
Head restraint mount
Insert special tool 52 0 070 into guide hole of sleeve (2) up to
upper area of retaining lug.
Feed release tongue of special tool into rear gap on retaining
lug (1).
Turn tool to release sleeve (2) and pull out towards top.
Installation:
Replace faulty sleeves.
RA Removing and installing/replacing all guide sleeves for rear head restraints
BMW AG - TIS
18.02.2013 18:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -