5 Series E60 525i (N53) SAL
65 75 071
Removing and installing (replacing) module
for passenger compartment sensor
Special tools required:
•
00 9 340
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection)!
Lever out trim (1) with special tool
00 9 340 and remove.
Disconnect plug connection (1) and remove module for
passenger compartment sensor with trim.
Replacement:
Open retaining lugs (2) and remove module (3).
Installation:
Arrow (4) printed on module for passenger compartment sensor
must be aligned in direction of arrow.
RA Removing and installing (replacing) module for passenger compartment sensor
BMW AG - TIS
18.02.2013 23:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -