5 Series E60 525Li (N52) SAL
Screw in Helicoil drill bit (2) with die (1).
Installation:
Ensure exact angularity to workpiece.
Important!
Do not allow chips (1) to come into contact with water.
Danger of fire and explosion.
Screw in aluminium Helicoil (1) by hand in direction of arrow as
far as it will go.
Adjust spacer (2) approx. 1 mm.
Secure spacer (2) with lock nut (3).
Screw in Helicoil-Plus (1) with preassembled aluminium Helicoil.
RA Repairing threads on magnesium engine block
BMW AG - TIS
17.02.2013 18:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -