Removing and Installing Cooling Loop for Power Steering - BMW 5 Series E60 525Li (N52K)
17 11 370
Removing and installing/replacing cooling
loop for power steering
Necessary preliminary tasks:
•
Remove module carrier
Recycling:
Catch and dispose of hydraulic fluid.
Observe country-specific waste-disposal regulations.
Release retaining clip (1) on left.
Release screws.
Important!
Risk of damage to connecting pipes.
Carefully press cooling loop (2) on right towards front, then unclip
on left and remove from module carrier (3).
RA Removing and installing/replacing cooling loop for power steering
BMW AG - TIS
19.02.2013 14:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -