5 Series E60 525xd (M57T2) SAL
11 00 050
Removing and installing engine (M57T2)
Special tools required:
•
11 0 020
Necessary preliminary tasks:
•
Disconnect battery negative lead from battery
•
Disconnect battery positive cable from jump-start connection
point in engine compartment
•
Lift engine hood into assembly position
•
Remove transmission
•
Remove radiator design cover
•
Remove overall engine cover
•
Remove air filter housing
•
Remove fresh air duct on left/right
•
Remove centre engine compartment partition wall
•
Remove intake air manifold
•
Release engine wiring harness from electronics box
•
Release fuel lines, feed and return lines
•
Remove fan clutch
•
Remove A/C compressor drive belt
•
Remove alternator drive belt
•
Drain coolant
•
Remove coolant expansion tank
•
Remove radiator
•
Remove engine underbody protection at front/middle
•
Remove catalytic converter
RA Removing and installing engine (M57T2)
BMW AG - TIS
20.02.2013 05:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
