5 Series E60 525xd (M57T2) SAL
11 24 571
Replacing all conrod bearings (M57T2)
Special tools required:
•
00 2 590
•
00 9 120
Necessary preliminary tasks:
•
Removing all pistons
Important!
The connecting rod bearing shells for the connecting rod and
the connecting rod bearing cap are different.
Replace connecting rod bolts.
Install the normal conrod bearing shell (low version red) in the
conrod bearing cap.
RA Replacing all conrod bearings (M57T2)
BMW AG - TIS
20.02.2013 05:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -