5 Series E60 525xd (M57T2) SAL
Important!
Small amounts of engine oil may emerge when the oil
pressure switch is removed.
Disconnect plug connection (1), remove oil pressure switch (2).
Installation:
Replace sealing ring.
Tightening torque 12 61 1AZ
.
Install special tool 11 4 050 with sealing ring (1) in place of oil
pressure switch.
Check engine oil pressure with DIS Tester
Attach special tool 13 6 054 with sealing ring (1) and special
tool 13 6 051 and connect to DIS Tester.
Check engine oil pressure with pressure gauge
Install special tool 13 3 063 and special tool 13 3 061
(pressure gauge).
Start engine and run at idle speed.
Check engine oil pressure.
Specified value.
Remove all special tools.
Reassemble car and set in horizontal position.
Switch off engine, wait approx. 5 minutes and then check engine
oil level.
Top up engine oil if necessary.
RA Checking engine oil pressure (M57T2)
BMW AG - TIS
20.02.2013 06:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -