5 Series E60 525xd (M57T2) SAL
Installation:
Replace clamp.
Tightening torque 11 65 1AZ
.
Clean sealing surfaces.
Release screw (1).
Release bolt (2) and remove turbocharger (3).
If necessary, replace turbocharger.
Modify oil return passage.
Release oil line banjo bolt (1).
Installation:
Tightening torque 11 42 2AZ
.
Replace sealing rings.
Oil line (1) must run parallel to housing.
Assemble engine.
Important!
To avoid damaging the threads and prevent turbocharger
leakage, insert retaining screws in 1/2 turns simultaneously.
RA Removing and installing / replacing exhaust turbocharger (M57T2)
BMW AG - TIS
20.02.2013 06:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
