5 Series E60 525xd (M57T2) SAL
Unlock plug on injection system pressure control valve and disconnect
Unlock plug on injection system pressure sensor and disconnect
Unlock plug on fuel measuring unit and disconnect
Unlock plug on fuel temperature sensor and disconnect
Unlock plug on oil pressure sensor and disconnect
Unlock plug on electrically operated valve and disconnect
Unlock plug on turbocharger and disconnect
Unlock plug on oil condition sensor and disconnect
Unlock plug on diesel particulate filter temperature sensor and disconnect
Unlock plug on reversing light switch and disconnect
Manual transmissions only
Unlock plug on automatic transmission and disconnect
If necessary, remove exhaust system
intermediate pipe
Unlock plug on preheating control unit and disconnect
Unlock plug on alternator and disconnect
Remove wiring harness
Installation:
Pay attention to installation position and attachment points
Note:
Now clear the fault memory.
RA Replacing wiring harness section for engine (M57T2)
BMW AG - TIS
20.02.2013 06:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
