bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing_replacing Fuel Filter With Fuel Level Sensor|Page 608 > < 6 RA Removing And Installing_replacing Fuel Filter With Fuel Level Sensor|Page 605
Page 1
background image

16 14 017

Removing and installing/replacing fuel filter
with fuel level sensor

Special tools required:

16 1 020

Recycling

Fuel escapes when fuel lines are detached. Have a suitable
collecting container ready.

Catch and dispose of escaping fuel.

Observe country-specific waste-disposal regulations.

Important!

Ensure adequate ventilation in the place of work!

Avoid skin contact (wear gloves)!

Ensure absolute cleanliness when working on the open fuel
tank.

Contaminants in the fuel tank can impair driving operation or
may even result in vehicle breakdown!

Before starting the engine for the first time:

Fill fuel tank with at least 5 litres of fuel.

Necessary preliminary tasks:

Draw off fuel from fuel tank

Remove rear seat bench

After completing work:

Check repumping function of suction-jet pump

RA  Removing and installing/replacing fuel filter with fuel level sensor

BMW AG - TIS

20.02.2013  07:35

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing_replacing Fuel Filter With Fuel Level Sensor|Page 608 > < 6 RA Removing And Installing_replacing Fuel Filter With Fuel Level Sensor|Page 605