5 Series E60 525xd (M57T2) SAL
17 00 009
Checking cooling system for water leaks
(M57TU, M47T2, M57T2, N47)
Special tools required:
•
17 0 101
•
17 0 105
•
17 0 106
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Checking pressure drop in cooling system:
Open cap on coolant expansion tank. Fit special tools 17 0 101
/ 17 0 105 .
Build up gauge pressure of 1.5 bar, wait approx. 2 minutes.
Cooling system is impervious to leaks if pressure drop is max.
0.1 bar.
Checking pressure relief valve in cap:
Note:
Coolant residue can cause the pressure relief valve in the cap to
stick, therefore repeat the check procedure on the cap 2-3 times.
RA Checking cooling system for water leaks (M57TU, M47T2, M57T2, N47)
BMW AG - TIS
20.02.2013 07:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
