5 Series E60 525xd (M57T2) SAL
Important!
Mechatronics can be destroyed by static discharges.
Therefore the contacts inside the plug must not be touched.
Insert special tool immediately after work step.
Unscrew plug (1) and disconnect.
Insert special tool 24 2 390 in sealing sleeve (1).
Remove transmission oil sump.
Unlock sealing sleeve with slide (1).
Note position of sealing sleeve.
Pull out sealing sleeve (1).
Installation:
Screw in sealing sleeve partially (lug in upper area). Turn until lug
engages in groove of transmission. Slide in sealing sleeve.
Lug on sealing sleeve must not be damaged!
RA Replacing mechatronics (GA6HP26/6HP32) M57T2
BMW AG - TIS
20.02.2013 08:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
