5 Series E60 525xd (M57T2) SAL
Insert special tool 25 1 120 in mounting and turn 90
°
counterclockwise.
Press mount upwards out of shift arm.
Remove rubber gaiter from body cutout and lift out with selector
lever.
Installation:
Insert rubber gaiter with arrow in direction of travel towards front.
Installation:
Grease selector lever ball.
Grease, refer to BMW Service Operating Fluids.
Install selector lever in selector arm.
Align mount:
•
Arrows on mount in longitudinal axis of vehicle.
•
Retaining lugs of mount, transverse to direction of travel.
RA Removing and installing shift lever (AWD)
BMW AG - TIS
20.02.2013 08:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
