5 Series E60 525xd (M57T2) SAL
31 10 010
Removing and installing/replacing
reinforcement plate (AWD)
Important!
Observe safety instructions for raising the vehicle
Driving without reinforcement plate is not permitted!
Necessary preliminary tasks:
•
Remove underbody protective plate
Release screw (1).
Release screws (2) and remove reinforcement plate (3).
Installation:
Replace screws.
Tightening torque 31 10 9AZ
.
RA Removing and installing/replacing reinforcement plate (AWD)
BMW AG - TIS
20.02.2013 09:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
