5 Series E60 525xd (M57T2) SAL
Important!
Pay attention to power steering hoses and lines when
lowering and raising. Hoses/lines must not be
kinked/tensioned/bent!
When lowering and raising, make sure the cover for the
relevant tension strut rubber mount is free to move.
Release screws (1, 2).
Installation:
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
Tighten down screws (1) and then screws (2).
Tightening torque 31 10 1AZ
.
Important!
Risk of damage!
The following operation must be carried out during lowering:
-
N54 with automatic transmission: Release screws (1)
and remove bracket (2) for transmission oil cooler lines
from front axle carrier
Lower front axle carrier until power steering gear rests on output
shaft.
RA Lowering/raising front axle carrier (AWD)
BMW AG - TIS
20.02.2013 09:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
