5 Series E60 525xd (M57T2) SAL
Release nut (1) approx. 3-4 thread turns; if necessary, grip
hexagon.
If necessary, replace lower section 31 2 242 with lower
section 31 2 246 .
Press control arm off swivel bearing with special tool 31 2 240
(comprising 31 2 241 , 31 2 243 , 31 2 244 , 31 2 245 and
31 2 246 ).
Unscrew nut (1) and remove control arm.
Installation:
Keep journal on ball head and bushing in swivel bearing clean and
free from grease.
Replace self-locking nut.
Tightening torque 31 12 6AZ
.
RA Removing and installing / replacing left or right control arm (AWD)
BMW AG - TIS
20.02.2013 09:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
