5 Series E60 525xd (M57T2) SAL
Force drive flange with special tools 33 2 116 / 33 2 201 ,
33 2 160 , 33 4 200 and 5 wheel bolts out of wheel bearing.
Note:
Rounded inside edge of special tool 33 2 160 must point to drive
flange.
Detach wheel bearing inner race from drive flange.
Remove swivel bearing and clamp with aluminium clamping jaws
in vice.
Important!
The bearing was destroyed when the drive flange hub was
removed and must not be reused!
Lift out retaining ring (1).
Pull out bearing with special tools 31 2 113 , 33 4 261 ,
33 3 266 and 33 3 261 .
Note:
The bearing can be forced out of the swivel bearing on a press.
Check dust sleeve, replace if necessary.
RA Replacing bearing for front wheel (AWD)
BMW AG - TIS
20.02.2013 09:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
