5 Series E60 525xd (M57T2) SAL
31 35 000
Removing and installing/replacing front
stabilizer (AWD)
Necessary preliminary tasks:
•
Remove front assembly underside protection
•
Remove stabilizer link on both sides from stabilizer
Unscrew nuts (1).
Remove stabilizer (2).
Installation:
Check rubber mount on both sides, replace if necessary.
Replace self-locking nuts.
Tightening torque 31 35 1AZ
.
Replacement only:
Remove rubber mount on both sides from stabilizer.
RA Removing and installing/replacing front stabilizer (AWD)
BMW AG - TIS
20.02.2013 09:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
