5 Series E60 525xd (M57T2) SAL
Important!
Risk of damage!
Mount special tool only with longer screws (M10x30) on drive
flange.
Pull drive flange off drive shaft with special tool 33 1 150 .
Lever shaft seal (1) out of front differential with a suitable
screwdriver (2).
Installation:
Drive in shaft seal with special tool 31 5 130 as far as it will go.
Coat sealing lips of new shaft seal (1) with front differential oil.
Important!
Risk of damage!
Do not tighten nut beyond punch marks. Otherwise the
clamping sleeve will be damaged.
Clean drive flange and attach.
Tighten down nut until punch marks on nut and shaft are aligned.
Install new lockplate (1).
RA Replacing radial seal for drive flange of front differential
BMW AG - TIS
20.02.2013 09:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
