5 Series E60 525xd (M57T2) SAL
31 60 535
Replacing both gaiters on left and right of
output shaft (output shaft removed)
Grip output shaft (1) in vice with aluminium clamping jaws.
Note:
2 = Joint, wheel side
3 = Joint, transmission side
Replacing gaiter of wheel-side joint:
Release Low Profile band clamp (1) and band clamp (2).
Pull back rubber gaiter (3).
Installation:
Feed gaiter (3) into groove of joint.
Press off joint (1) via contact pressure of retaining ring on
shaft (2).
Installation:
Push on joint until retaining ring can be heard to snap into place.
Lift out retaining ring (1).
Installation:
Replace retaining ring (1).
RA Replacing both gaiters on left and right of output shaft (output shaft removed)
BMW AG - TIS
20.02.2013 09:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
