5 Series E60 525xd (M57T2) SAL
32 31 070
Removing and installing / replacing steering
spindle lower section (AWD)
Important!
If the lower section of the steering spindle is separated from
the power steering gear/steering column, the steering column
switch cluster may be damaged when the steering wheel is
turned.
Necessary preliminary tasks:
•
Remove trim panel for pedal assembly
Release clamping screw (1).
Note:
Before detaching steering spindle (3) from steering column, mark
double joint in relation to steering column.
Detach double joint (2) of steering spindle (3) from steering
column.
Pull upper section (2) out of steering spindle (3).
Installation:
Clean thread to remove all remnants of screw securing adhesive.
Replace clamping screw.
Clamping screw must rest in groove of steering column.
Tightening torque 32 31 1AZ
.
RA Removing and installing / replacing steering spindle lower section (AWD)
BMW AG - TIS
20.02.2013 10:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -