5 Series E60 525xd (M57T2) SAL
6.
Align bracket (4) to engine compartment partition wall and
press into place
7.
Refer to the above-mentioned work steps for other notes on
installation
After installation:
•
Turn steering wheel in both directions to full lock. The airbag
warning lamp must not light up in the process.
•
Carry out steering angle sensor adjustment
•
Check directional stability of car
RA Removing and installing / replacing steering spindle lower section (AWD)
BMW AG - TIS
20.02.2013 10:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
